Vari-Snap Rafter Supported Glazing Bar For Polycarbonate

Description

Vari-Snap Rafter Supported Snap-Down Glazing Bar For 10mm, 16mm & 25mm Thick Polycarbonate Sheet

The Vari-Snap rafter supported glazing bars consist of an aluminium base combined with a PVCu top cap which snaps together to join your polycarbonate sheets.  Waterproofing is provided by the EPDM rubber gaskets on both the top cap and the base which when the top cap is engaged provides a weather tight seal. They are also known as push-down, snap-fit, push-fit or snapdown glazing bars.  

Glazing bars provide secure, weather tight jointing of 10mm, 16mm and 25mm polycarbonate sheets.  Our collection of snapdown glazing bars are available in colours white and brown and of varying lengths from 2000mm to 7000mm.  

These snapdown glazing bars are easy to fit, with typical applications including:

• Lean to roofs
• Canopies
• Walkways
• Pergolas
• Carports
• Smoking Shelters
• Covered Outdoor Areas
• Sneeze Screens

Each snapdown glazing bar comes with the following:  

• Rafter support
• Snap-fit design with dedicated locking points
• Compatibility with 10mm, 16mm, and 25mm polycarbonate sheets
• Suitability for a number of applications including lean to roofs
• Heavy-duty aluminium base 
• PVCu top cap
• One end cap
• Two gaskets (must be torn apart to get two separate gaskets – see picture below)

PLEASE NOTE:  Glazing Bars are not supplied with fixing screws and are not suitable for use with glass.  

Benefits of Snap Down Glazing Bars

The following lists a number of advatages of snap down glazing bars:  

• Easy and simple installation – its snap-down design means that the installation process is relatively easy
• Weather resistant – the snapdown glazing bar is designed to withstand even extreme weather conditions, perfect for outdoor use on roofs
• Secures polycarbonate roofing – specifically designed to secure and hold polycarbonate roofing sheets of 10mm, 16mm, and 25mm thickness
• Durability – the aluminium base ensures that the snapdown glazing bar is sturdy and durable for securing the polycarbonate sheets

Installation

When it comes to installing a snapdown glazing bar, it is quite simple when you get the hang of it. Basic instructions to follow are:

1. Ensure that your project framework is suitable for application of the snap down glazing bars – the minimum width of your rafter should ideally be the same as the width of your bars
2. Wear appropriate PPE equipment
3. Drill the centre of the snapdown glazing bar between the teeth – it’s recommended that this should be no more than 400mm interval and approximately 75mm from each end
4. Fit and push the gaskets into place on both sides of the snapdown glazing bar
5. Position the polycarbonate sheets into place, making sure that the panels align with the teeth section of the bar
6. Click down the end cap and top cap into position

Glazing bars are designed to sit on top of a structural rafter.  Bars should only be installed pointing down the pitch of a roof and are not designed to be used horizontally.  i.e. the glazing bars should run in the same direction as the water runs off the roof.

Maintenance and Care

Appropriate maintenance and care of your snap down glazing bars will help to maintain their longevity, ensuring that they remain sturdy and durable for holding your polycarbonate sheets. Although they’re a product that’s typically low maintenance, when fitted, it’s important that you regularly maintain them (alongside the polycarbonate sheets).

Rain can sometimes be enough for a light clean, but if you begin to spot stains or other debris on the snapdown glazing bar or on the polycarbonate sheets, then it’s time to do some simple maintenance:

1. Always use a ladder when cleaning the roofing area
2. With a sponge or washcloth and mild detergent, gently wipe away any stains or debris on the glazing bars or polycarbonate sheets
3. Rinse with hot or warm water
4. Dry the wet areas with a cloth or towel

Varico Ltd is one of the leading UK polycarbonate suppliers, providing a wide range of polycarbonate products and accessories, including rafter supported snap down glazing bars. Secure your polycarbonate roofing sheets with Vari-Snap rafter supported glazing bar for polycarbonate at Varico Ltd.